There’s a good chance that hair is the reason of a clogged shower or bathtub drain. Almost everyone has had a hair blockage at some time in their lives. Long and short hair will still manage to get down the drain and form clumps that gradually clog your pipes, even with a drain stopper. You must figure out a way to remove hair from the drain in such a condition.

Many individuals run to harsh chemical drain cleaners when their drains become clogged. The majority of these items can gradually harm your plumbing pipes. Some people spend a lot of money by calling the plumber right away. However, there are some quick and inexpensive natural methods you may employ to clear hair from a drain.

 

Ways to Get Rid of Hair Clog:

 

  1. Use Baking Soda and Vinegar

Hair blockages can often be removed with the help of baking soda and vinegar. Start by pouring a little dish soap down your drain, then add a cup of vinegar and a cup of baking soda for the maximum results. Wait about five minutes for the vinegar and baking soda to react chemically, and then follow that with a cup or more of hot water. You should still use a cup plunger on your drain to remove any remaining hair after doing this to clear away the majority of the hair clog. Make sure you are particularly utilizing a cup or “flat” plunger, and repeat this procedure as required if the obstruction is still present.

 

  1. Use Tweezers Or Needle-Nose Pliers

If you have attempted to remove a hairy obstruction from your drain by plunging it out but have been unsuccessful, you may need to try pulling it out with a pair of tweezers. If your drain has a stopper, you must first remove it. Depending on the type of your drain, you might need to perform this by hand sometimes, though you might also need a screwdriver. After that, use a flashlight to throw light into your drain so you can see the block more clearly. You should then be able to remove that nasty collection of hair with your needle-nose pliers.

 

  1. Use Drain Snake

If using baking soda and vinegar to melt your hair clog, diving it out, and using tweezers to remove it still didn’t work, you might be able to use a snaking device to break that blockage apart. Consider purchasing a zip-it gadget as well. These disposable plastic drain cleaners are affordable, simple to use, and easily accessible online. However, you might also want to follow up with the baking soda and vinegar method described above or at the very least flush your drain out with hot water to make sure the blockage is entirely gone. Snaking your drain should efficiently break up any jams and assist scrape the walls of your line clean.

 

  1. Remove Your Whole Drain

The most thorough home cure for clearing a hair clog is the last one. After using each of the previous ways without success, you might completely remove your drain and attempt to clear it out that way. A plug wrench, a tool made specifically to fit into your drain’s crossbars so you can easily pry it out, is required to remove the drain from your shower or bathtub.

LOOKING FOR DRAIN CLEANING SERVICES IN  ILLINOIS?

CALL (847) 624-3872

Some Effective Ways to Prevent Hair Clog from Your Drain

Although it requires some planning, keeping hair out of your drains is surprisingly easy. Here are some practical suggestions you may use to significantly lessen the quantity of hair that enters your drains.

 

  1. Brush your hair before you get into the shower

By brushing your hair beforehand before shampooing, you can prevent as much stray hair from entering your shower and clogging the drains. A hair plug in the drain is considerably more difficult to remove than a clump of hair from your brush!

 

  1. Purchase a shower drain hair trap

Although long hair is the main cause of shower drain blockages, there are still things you can do to prevent it. The simple and affordable option is to buy a shower drain hair catcher, which goes over the drain and catches any hair before it can reach the drain line. Simply remove the hair from the trap after your shower and dispose of it.

  1. Maintain your drain

When your drains are covered in soap scum and other debris, hair clogs are more likely to form. An effective technique to prevent clogs is to keep your drains clear. Pour some baking soda and white vinegar into your drains on a regular basis. After the bubbling stops, run hot water into the drains.

LOOKING FOR DRAIN CLEANING SERVICES IN  ILLINOIS?

CALL (847) 624-3872

 

You already know that having running water at home is essential for many different chores. But unless you experience a water pressure issue, you might not realize how much you depend on it.

Low water pressure can be very annoying, especially if the issue keeps getting worse. Low water pressure can occasionally be resolved quickly, but it can also persist over time. Homeowners would benefit from being aware of the typical causes of low water pressure as well as possible solutions. Additionally, homeowners might gain from knowing how to avoid future instances of low water pressure.

Water pressure issues can have a number of causes. Here is a look at some of these typical problems and potential fixes.

Buildup of Debris in Pipes

Water pressure can readily be affected by a pipe obstruction. If contaminants back up because of water main breaks, they may clog pipes. Over time, mineral buildup clogs pipes, which lowers water pressure.

Corrosion

Oxidation produced by corrosion builds up on the inside walls of pipes, obstructing the passage of water. It is typical in older galvanized steel pipes, just like mineral scaling. A corroded pipe ultimately starts to develop holes before it entirely breaks.

Meter valve for water

Your home’s water pressure may be affected by a valve that is partially open or closed. Check to determine if the water meter valve is fully open if you just had plumbing work done and the water pressure is low.

Broken Pressure Regulator

The purpose of the pressure regulator is to keep the water pressure constant in plumbing systems when one is installed. Adjustments are typically not required because the manufacturer typically sets it at between 45 and 60 psi. Adjust the regulator if your water pressure is low. But if the gadget is broken, it might need to be fixed or replaced, which calls for a qualified plumber.

LOOKING FOR RESIDENTIAL PLUMBING IN  ILLINOIS?

CALL (847) 624-3872

Closed Shut off Valves

There is a main shut-off valve for the homeowner as well as local shut-off valves in addition to the main shut-off valve. Any of these valves may have some of the way closed.

The homeowner should check the main shut-off valve for the house if the water supply for the entire house has been affected. The owner should check the local shut-off valves if only one fixture’s water supply has been affected.

When a plumbing fixture is not enclosed in a cabinet, such as a toilet, local shut-off valves are often found on the wall behind the fixture. Sinks and other fixtures that are installed in vanities typically have a shut-off valve on the wall below the fixture, which is frequently placed in the cabinet.

Sometimes there are shut-off valves in the wall behind the fixture for showers and bathtubs. Homeowners might discover an access panel on the wall behind the fixture to gain access to the shut-off valve. The local shut-off valve may be located in the home’s basement or crawl space if it cannot be accessed through an access panel behind the fixture.

Depending on the design and arrangement of the home, finding the main shut-off valve may be challenging. If a house has a basement, the shut-off valve is generally located 3 to 5 feet or less from the point where the water enters the house.

Water Supplier Issues

You can have low water pressure at home if your water provider is having issues with water pressure. You cannot resolve problems with your supplier or the public water supply from your house. Contact your water supply provider to find out if any issues are occurring and when they are anticipated to be rectified if your neighbors are also having a problem.

Plumbing leaks

Plumbing leaks can cause a wide range of issues. One of them is low water pressure, which occurs when some water in your plumbing system does not reach its intended location. It either pours out of the pipe or is diverted. Contact us immediately away for expert plumbing service in Northern Virginia if you see or suspect a leak. In order to stop further damage, Cardinal Plumbing offers emergency services and may respond right away.

There are many things that homeowners can do to keep their home’s plumbing in good condition. Following best practices can help them maintain their home’s value and a good quality of life in their home.

Some low water pressure problems are straightforward to resolve with do-it-yourself projects, including checking valves and using drain snakes, although this much relies on where the low water pressure is coming from and what’s causing it. However, it could be necessary to hire a professional agency to check your complete plumbing system if low water pressure affects your entire house or structure. You might need to replace your complete plumbing system if your pipes are old or your plumbing system is out of date. More issues than just low water pressure might be brought on by clogged or damaged water lines.

LOOKING FOR RESIDENTIAL PLUMBING IN  ILLINOIS?

CALL (847) 624-3872